Fitting Instructions

Aluminium Strip Anodes

Instructions

The ZD42 range a low profile zinc anode with a non reactive aluminium insert, ideally suited for fitting to high speed aluminium hulled vessels. The anode is not recessed but prominent on hull surface and can be attached after construction.

Each anode requires 3 or more fixing positions:-

ZD42/36” and ZD42/54” - 3 fixing positions

ZD42/72” - 5 fixing positions (7 on fast craft)

The ZD42 range of anodes are supplied in various lengths and also may be cut to length. It can be supplied un-drilled or drilled and counter bored to standard centres, Fixing holes are drilled to suit 10mm studs and it is imperative that the fixing hole 13mm is counter bored down to the aluminium core.

Maintenance

Please refer to our knowledge base for further support.